Sony DHC-MD313 - Manual (Page 49)

To change the setting
Start over from Step 1 through Step 5, then
press CURSOR
^ or ^ until the time you
want to change flashes.
To check the setting / To use the
timer
Press CLOCK/TIMER SELECT repeatedly
until "DAILY TIMER" appears. The start '
time, followed by the stop time, and the
sound source appears, then the original
display appears.
To cancel the timer
Press CLOCK/TIMER SELECT repeatedly
until "TIMER OFF" appears.
Tip
When you connect the optional tape deck TC-TX313
to the system, you can activate the deck using the
Wake up Timer function without setting the timer
on the deck.
Notes
• You cannot activate wake up timer and recording
timer at the same time.
• Do not operate the system from the time the
power turns on until the playback starts {about 20
seconds).
• If the power turns on before the preset time,
playback starts with your selected music source at
the preset time.
• If you use another component (except for the
optional tape deck TC-TX313), you must set the
timer on both systems to the same time.
Timer recording
radio programmes
To timer record, you must first preset the
radio station (see page 7) and set the clock
(see page 6).
The MD is automatically labelled with the
Station Name, the start time and the stop time
of the recording if the station is labeled (see
page 45).
1
Tune in the preset radio station (see
page 7).
2
Press CLOCK/TIMER SET.
3
Press + /- repeatedly until "REC
TIMER?" appears.
4
Press ENTER/YES.
The hour indication flashes.
continued
49