Connecting audio components, Cormecting optional a/v components, And outdoor aerials – Sony DHC-MD313 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting optional
AA/ components and
outdoor aerials
To enhance your system, you can connect
optional components. Refer to the
instructions of each component.
Connecting audio
components
Connect the plugs from the optional
component to jacks of the same colour on the
rear panel of this unit.
To the audio
input of a
cassette deck.
Tip
When you connect the
TC-TX313
stereo cassette
deck to the
DHC-MD313,
be sure to use the
AU BUS
terminals.
To listen to analogue components
(except for the optional tape deck
TC-TX313)
If the sound from a connected component is
distorted, reduce the input level.
1 Press FUNCTION repeatedly until "TAPE"
appears.
2 Turn off the system by pressing POWER.
3 While holding FUNCTION down, press
POWER again.
"Attenuate ON" appears and "ATT"
flashes in the display.
AH LEVEL-STNC
A t t e n u a t e Q N
To reset to the original level, repeat steps 1, 2,
and 3.
continued