Editing an md, Before you start editing, Editing functions – Sony DHC-MD555 User Manual
Page 50: Erase — erasing re^rdings, Move — moving recorded tracks, Divide — adding track numbers, Combine — combining recorded tracks, Undo — undoing the last edit, After editing, Before pulling out the power cord
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing an MD
Before you start
editing
You can edit the recorded tracks on an MD by
moving and erasing tracks, etc. By editing the
recorded tracks, you can create original MD
albums without dubbing between MDs.
Editing functions
• Name — Labeling MDs and tracks
You can create titles for your recorded
MDs and tracks using alphabet letters
(upper and lower cases), numbers and
some symbols.
• Erase — Erasing re^rdings
You can erase unwanted tracks.
• Move — Moving recorded tracks
You can freely change the order of the
recorded tracks.
• Divide — Adding track numbers
When you divide a track, a track number is
added at the start of the new track.
You can also mark track numbers in the
middle of a track, letting you easily find
your favorite phrases.
• Combine — Combining recorded
tracks
This function erases the blank space
between two tracks and joins them into a
single track.
This function also lets you join separated
tracks such as tracks 1 and 4.
• Undo — Undoing the last edit
If you erase the wrong track or change the
track order incorrectly, this function lets
you cancel the last edit and restore the
tracks and track order to the condition
before the edit.
Before you start editing
You can edit an MD only when;
• The MD is not record-protected.
• The MD play mode is normal play.
Be sure to check the following before starting
editing:
Check that the MD is not record-
protected.
Slide close the tab at the side of the MD
to cover the hole.
If the MD is record-protected, you
cannot edit the MD.
Press PLAY MODE so "SHUFFLE"
or "PROGRAM" disappears to
select normal play.
You can edit MDs only during normal
play. You cannot edit MDs during
Shuffle or Program Play.
After editing
^ Eject the MD, or press l/Cl) (power)
to turn off the system.
"TOC writing" flashes. The MD Table of
Contents (TOC) is updated and editing is
completed.
Before pulling out the power cord
MD editing is completed when the MD Table of
Contents (TCC) is updated. The TOC is updated
when you eject the MD or press l/(i) (power) and
turn off the system. Do not pull out the power cord
before updating the TOC (while "TOC" is lit) or
while updating the TOC (while "TOC" is flashing)
to ensure the complete editing.
50