Connecting an md ì/\ialkman (continued), Motes, Character – Sony DHC-MD555 User Manual
Page 76: Note, Recording from an md walkman 1
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting an MD ì/\iALKMAN
(continued)
6
Use the remote for the MD
WALKMAN to set the volume to
the highest setting.
7
Disconnect the remote for the MD
WALKMAN and connect the MD
WALKMAN to the system.
Connect the end with the loop to the MD
WALKMAN.
Motes
• Do not place the MD WALKMAN on top of the
system. The sound may drop out or noise may
occur. Doing
so
could also result in
malfunction.
• If the Mega Bass function is on, or the AVLS
function is off, the sound may be distorted during
MD WALKMAN play.
• If you connect the MD WALKMAN to the system
while the power is on, electroruc noise may occur,
resulting in misoperation. Always be sure to turn
the system off before connecting the
MD WALKMAN.
• When you connect an MD WALKMAN to the
system, the MD WALKMAN cortsumes more
power than during normal play. Make sure the
battery level is sufficient before starting recording.
Recording from an
MD WALKMAN
1
MULTI JOG ■
CHARACTER
1
Press FUNCTION repeatedly until
"MD WALKMAN" appears.
2
Set the MD WALKMAN to playing
pause mode.
If your MD WALKMAN does not have a
playing pause function, set the MD
WALKMAN to stop mode.
3
Press or on the
MD WALKMAN repeatedly to
select the track to be recorded.
Note
You can select tracks only for models with the
hd-d /►►! button (except for models on which
these buttons also function as the ► button).
4
Press MDWALBCMAN SYNC.
The MD in the slot is automatically
pulled in and the MD deck stands by for
recording.
76