Connecting a tv, vcr, dvd player, etc, Listening to the sound of connected mv components, Listening to the sound of connected – Sony DHC-MD555 User Manual
Page 79: Components
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting a TV, VCR,
DVD player, etc.
Connect the component to the DVD/VIDEO
IN jacks on the system.
The system does not support Dolby Pro Logic, so
you cannot listen to material played back on a DVD
player with Dolby Digital or Dolby Pro Logic. In
addition, this system cannot make a digital
recording from a disc that was recorded with Dolby
Digital.
• DOLBY, the double-D symbol IX, the Dolby
Digital- and "PRO LOGIC" are trademarks of
Dolby Laboratories Licensing Corporation.
Listening to the
sound of connected
MV
components
1
Prepare the connected analog
component.
2
Press FUNCTION repeatedly to
select "TAPE" or "VIDEO".
Sound source
FUNCTION
Tape deck
TAPE
TV
VÍDEO
VCR
VIDEO
DVD player
DVD*^
3
o
o
3
c
•
5
'
3
A
3
S’
A
• To select "DVD", press FUNCTION
repeatedly to select "VIDEO" then press
MENU/NO and press ENTER/YES. The
maximum level of the signals output by a
DVD player is different from that of other
analog components, so always be certain to
switch to "DVD" when listening to sound
from a DVD player.
Furthermore, to change back to "VIDEO"
when changing the connected component
from the DVD player to a VCR or other such
component, press FUNCTION repeatedly to
select "DVD", then press MENU/NO and
press ENTER/YES. Failure to change the
FUNCTION setting before using the VCR or
other such component may result in
malfunction.
n
O
3
■D
0
3
n
3
79