Structure of the supplied am antenna, To set up the am antenna, To connect the am antenna – Sony DHC-MD555 User Manual
Page 6: Structure of the supplied fm lead antenna
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connect the AM antenna.
Structure of the supplied AM
antenna
step 1: Hooking up the system
(continued)
The antenna is the proper shape
and length for receiving AM radio
waves, so do not remove or roll up
the antenna.
To set up the AM antenna
1
Remove only the twisted portion
() of die antenna from the
plastic stand.
2
Set up the stand.
Open the stand,
To connect the AM antenna
1
Insert the antenna cord into the AM
antenna terminals.
Jack type
0
and fit the antenna into the
groove.
Pull gently on the antenna cord to
make sure it is connected correctly.
If the antenna cord pulls out, connect
it again.
m
Connect the FM antenna.
Structure of the supplied FM
lead antenna
O
: The antenna cord receives signals
along its entire length, so do not roll
up the cord.
O
; Insert this portion into the antenna
terminal.