Using the initial setup, Using the dtv receiver menus – Sony DTR-HD1 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the DTV Receiver Menus
Using the Initial Setup
Once you have finished making your connechons to the DTV
Receiver, you will need to setup your system before you can
receive digital prograixuning.
1 Press the remote control's POWER button for the DTV
Receiver and the TV.
2 Press the TV /VIDEO button until the video input for the
DTV Receiver appears on the screen.
3 The Welcome Screen will appear on your TV. Press MENU
to begin.
4 Select Auto Program and allow the system to program all
available DTV channels. During the auto prograimning
process, an "AUTO PROGRAMMING" message is
displayed on the front panel of the DTV Receiver as it
scans and presets available digital channels.
The Auto Program function must be allowed to finish in order to view
DTV programs.
^ Check the lime Zone setting under the Channel Setup Menu so that
■ y p u can display Jhei^rrred time on youf .sgeet).
13