Troubleshooting – Sony DTR-HD1 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Additional Information
Troubleshooting
Problem
Resolution
No picture
(screen not lit),
no sound
Make sure the power cord is plugged in.
Check to see if the TV /VIDEO setting is
correct: when watching TV, set to TV,
and when watching video tapes, set to
VIDEO 1,2,3 or 4.
Check antenna connection.
Check video cable connection.
Try another channel. It could be station
trouble.
Remote control
does not operate
Good picture, no
sound
Cannot receive
upper channels
(UHF) when using
an antenna
Batteries could be weak. Replace the
batteries.
Press the DTV Receiver's power button
off, wait for a few seconds, and then
power on again.
Press TV (FUNCTION) when operating
your TV.
Make sure the DTV Receiver's power
cord is connected securely to the wall
outlet.
Keep the DTV Receiver at least 3-4 feet
away from fluorescent lights.
Check the orientation of the batteries.
Press MUTING so that "MUTING"
disappears from the screen.
Check audio cable connection.
Use DTV AUTO ADD in the Setup Menu to
add receivable channels that are not
presently in DTV Receiver's memory. ■
Only snow and
noise appear on
the screen
Check the antenna/cable cormections.
Make sure the channel is broadcasting
programs.
25