Sony DTR-HD1 - Manual (Page 23)

Additional Information
If the code doesn't work for your component:
□ Try progrartuning the remote control using the other
codes listed for your component.
□ If you cannot get your component to respond to the
DTV Receiver's remote control — even after trying all
the code numbers for your component — your
component may not be compatible with the DTV
Receiver's remote control. If this happens, you must use
your component's own remote control to operate it.
Tips
□ If more than one code number is listed, try entering them
one by one until you come to the correct code for your
component.
If you enter a new code niunber, the code number you
previously entered at that setting is erased.
In some rare cases, you may not be able to operate your
component with the supplied remote control. If this
happens, you must use your component's own remote
control to operate it.
Whenever you remove the batteries to replace them, for
example if too much time is taken, the code numbers may
revert to the factq^ setting and must be reset.
23