Connecting the dtv receiver to a standard tv, Dtv receiver – Sony DTR-HD1 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Digital Television Receiver
Connecting the DTV Receiver to a
Standard TV
1 Complete the connection described on page 7.
2 Using an A/V cable, connect the DTV Receiver's AUDIO and
VIDEO OUT jacks to your TV's AUDIO and VIDEO IN jacks.
^ If you have an A/V receiver that can decode digital sound, connect the
Tv Receiver's Dolby Digital Output (optical) jack to the MM receiver's
DIGITAL SIGNAL (IN) jack with an optical cable (not supplied).
3 Make sure that the switch on the back panel of the DTV
Receiver is turned to "ON".
For optimum picture quality, use S Video instead of the yellow A/V
cable. S Video does not provide sound, your audio connectors must still
be connected.
Using component video jacks (Y, P
b
, P
r
) will give you superior video
quality, if your television is so equipped.
DTV Receiver