Sony PCG-735 User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Your Notetx)Ok Computer
2
Remove the PC card slot protector.
When you use a Type III PC card, you need to remove both the top
and bottom PC card slot protectors.
Insert the PC card into the PC card slot, front label facing up. Gently
push the card into the slot until the card is fixed into the connector.
The release button comes out.
PCcirrt
Oo not face a card into the slot. It may damage die connector piis.
V you have difTiculQ inserting a card, check that you are insert the card with die conect
aientation
To remove a PC card
1
Pull the PC card release button up and press it.
2
Gently grasp the card and pull it out.
3
li\sert the PC card slot protector back into the empty slot.