Sony PCG-735 - Manual (Page 93)

VAIO NotcOook Computar Usar Guido
Word Processing - Optimizes power management with longer
timeouts on the hard disk and display screen. You can also establish
settings for LCD (Video) Standby, Hard Disk Sleep, and System
Suspend to optimize power management for your system.
Communications - Extends battery life by inihating a quick display
timeout. The Internal modem remains powered. You can also
establish settings for LCD (Video) Standby, Hard Disk Sleep, and
System Suspiend to optimize power management for your system.
F>owcr Management Commands
PowerPanel also provides power management commands that you can
use to activate specific power management functions and to control
power for a specific device. You might use these commands when you
want to override a profile setting or initiate an immediate action, such as
putting the system into Video Standby mode before the Video Standby
timer expires.
System Suspend - Puts the system into System Suspend mode, a
power management state that saves the state of the system and
peripheral devices in memory (RAM). Power consumption reduces
to a minimum, and the system remairts on. To return the system to
the active state, press any key or the power switch on your
computer.
System Hibernation - Provides for the lowest level of power
consumption. The system writes the state of the system and
peripheral devices to the hard disk and turns off the system power.
To return the system to the original state, use the power switch to
turn on power. The system saves the data in the Save to Disk
Partition on the hard drive.
Video Standby - Turns off the LCD to save power. If you turn off
the Video Standby timer, the display remains active except when
the system enters System Suspend mode. The video display system
is one of the largest consumers of power in the system.
Hard Disk Standby - Turns off the hard disk spindfe motor.
Although you can manually turn off the power to the hard disk
through this command, any system-request to the hard disk turns
on the power to the hard disk. During the System Suspend power
management state, the system can turn off idle peripheral devices
to conserve power.
PCMCIA Control - Controls the PC card sockets. Click this
button to open the PC Card (PCMCIA) Properties dialog box. You
can view the properties for the PC cards.