Connecting a bigital video camera recorder, Cormecting a digital video camera recorder – Sony PCG-735 User Manual
Page 76
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VAIO Notet)OOk Computer User Guide
Connecting a Bigital Video Camera Recorder
You can connect a digital video camera recorder to the i.LINK’^*^
(IEEE1394) connector on the docking station. See "Connecting the
Docking Station" on page 49.
fo connect a digital video camera rocorddr
J Plug the i.LINK cable into the i.LlNK corunector on the rear of the
docking station and the DV In/Out connector on the digital video
camera recorder.
O O a es # «O* ^SSB
• .Q. •••Ifo-g) <c
SB
j
Digital video
. camera recorder
to I.LINK
9
,
10 DV Inr'Oul
J
IJ.INK cable
(supplied with docking station)
^ The Soi^ digital video catnera recorder (DCR-PC7) is pictured; your digitai video camera
recorder tray heed to be connected difTereritiy.
On Sony digital video cameras, conneaors labeled *0V In/Out' or 'iXINK' are I.LINK-
compa^.
See the maruial that came with your digital video camera recorder for more information on
installation and use.
Do not connect mae than one digital video camera at a time. The software supplied with
your confer will not recognize multiple cameras.
The i.LiNK connector on the docking stabon does not supply power to eicternal dewes. If
the external device requires power from the ¡.LINK connector, you cannot use the device
with the docking station.
The docking station supports transfer rates up to 200 Mbps; however, the actual transfer
rate is the lowest transfer rate of the external device. ■ ~
The i.LlNK features available may vary based on the software applicatjons you use. See the
documentation that came with your software for more information.