8 press > to make the “time" position flash, 12 press execute, Setting the time and date 7 – Sony SLV-R1000 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Time and Date
7
Press ► to make the
“year" position flash and
press A or V to change
the year.
If you want to leave the
year indication unchanged,
just press ►.
10 Press >■ to make the
“minutes” position
flash.
8 Press > to make the
“time" position flash.
CLOCK SET
7/4 n 993
SUN>1
11 Press A or V until “32"
appears in the minutes
position.
CLOCK SET
7/4/1:993
SUN 3^3*^
9
Press A or V until “3 PM"
appears.
CLOCK SET
7/4 ' 1 9 9 3
SUN-
'i' ' t *
12
Press EXECUTE.
Pressing EXECUTE will set the clock to 3:32 pm 00
seconds.
NOTES:
• Do not set the time and date during timer-activated recording, timer recording standby or quick-timer recording.
• When the time and date clock is displayed, the clock keeps running as long as no changes are made. The seconds are not
reset to 00 when you return to the original screen.
20
Preparation