Sony SLV-R1000 - Manual (Page 22)

Presetting the Active Channels
Press ◄ or ► to select
• NORM" or “CATV".
NORM presets the VHP
and UHF channels: CATV
presets your cable TV
channels. The lowest
channel number. 2 for
NORM and 1 for CATV, will
appear on the screen.
TUNER PRESET rgH2l
► NORMAUCATV'NORM CATV
AUTO PRESET
MANUAL SET «ADO
ERASE
AFT »ON
FINE TUNING
OFF
Press EXECUTE.
Receivable channels are preset in numerical sequence.
When no more channels can be found, the presetting
stops and the picture of the lowest numbered channel is
displayed on the TV screen.
6 Press A or V to move the
cursor to AUTO PRESET.
TUNER PRESET IgPTg!
NORMAUCATV'NORM CATV
►AUTO PRESET
MANUAL SET »ADO ERASE
AFT »ON
FINE TUNING
OFF
NOTE:
The VCR automatically exits from the TUNER PRESET menu
if you don't proceed for more than one minute.
Presetting Desired Channels or Disabling Unwanted Channels
After automatic presetting, you can disable and/or add channels.
Use A and v to move the cursor.
Use < and > to select the items. 1 Follow steps 1 to 3 In "Presetting All Receivable
Channels Automatically” on page 21.
2 Press * or w to move the cursor to MANUAL SET.
3 To disable channels, press CH -H/— to select the
channel.
To add channels, press channel number buttons (0 to
9) and then ENTER key to select the channel.
4 To disable channels,
press or P- to select
•ERASE".
To add channels, press
◄ or ► to select “ADD”.
TUNER PRESET ICR ¿31
NORMAUCATV* NORM CATV
AUTO PRESET
►MANUAL SET «AOD ERASE
AFT »ON OFF
FINE TUNING
5 Press EXECUTE.
When you press CH +/—, the disabled channels are
removed and the added channels are displayed.
22 Preparation