Sony SLV-R1000 - Manual (Page 30)

Playback
Playback
The VCR automatically detects the type of video format in which the tape was recorded (S-VHS format or VMS format) and the
recording tape speed mode in which the tape was recorded (SP mode, LP mode or EP mode), and plays back the tape
accordingly. When a tape recorded in the S-VHS format is played back, the S-VHS indicator will appear in the display window of
the VCR regardless of the S-VHS ON/OFF switch setting.
1 Insert a cassette.
2 Turn on the TV.
3 If your TV is connected to both VHF/UHF OUT and
LINE OUT 1 or 2 on the VCR, select the input for the
VCR. If your TV is connected only to the VHF/UHF
OUT on the VCR, select the channel for the VCR (CH 3
or CH 4).
4 Press ► PLAY.
To stop playback:
Press ■ STOP.
To stop playback for a moment:
Press I I PAUSE.
Press I I PAUSE again or ► PLAY to resume playback.
To fast-forward the cassette at high speed during stop
mode:
Turn the DUAL MODE SHUTTLE ring to the right (►►).
To rewind the cassette during stop mode:
Turn the DUAL MODE SHUTTLE ring to the left (◄◄).
To rewind the cassette at high speed
Press ◄◄◄ HI-SPEED REWIND.
To rewind the cassette to its beginning and to playback
automatically (auto playback function):
You cannot use the Remote Commander for the auto
playback function.
Press ► PLAY while depressing ◄◄◄ HI-SPEED REWIND or
while fully turning the DUAL MODE SHUTTLE ring to the left
(◄◄).
When the cassette reaches the end:
The cassette automatically rewinds to the beginning (auto
rewind), and power remains on.
NOTES:
• When the TV is connected only to the VHF/UHF
OUT on the VCR, you cannot hear the program in
stereo.
• In order to hear stereo playback, it is necessary to
connect the L/R audio out connections of the VCR to
a stereo monitor TV, or stereo audio system.
30
Basic Operations