Sony SLV-R1000 - Manual (Page 6)

I
Hookups and Getting Started
Before you can use your VCR for the first time, you need to
connect it to your TV and set it up to receive programs for
viewing and recording. This section explains how to hook up,
set up, and operate your VCR so that you can start enjoying
it right away. There are, however, many types of TVs
available and many different ways in which your TV can be
hooked up. As a result, this manual describes several ways
your VCR can be connected.
To hook up your VCR so that it works best for you, first scan
through the table below. Then use the accompanying
diagrams and procedures on the following pages to
complete your VCR's connections.
are provided where you can find this information.)
Before making the connections, check the following points:
• Turn off the power to the VCR and TV.
• Do not connect the AC power cord until all of the
connections are completed.
'003= To wall outlet •
• Make connections firmly. Loose connections may cause
picture distortion.
• If your TV doesn’t match any of the examples provided,
consult your nearest Sony dealer or qualified technician.
6 Preparation