Focusing manually, When to use manual focus, To return to autofocus mode – Sony CCD-TRV62 User Manual
Page 37: Focusing maflually t
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Focusing manually
When to use manual focus
In the following cases you should obtain better results by adjusting the focus manually.
[b]
/
□
\
[d]
• Insufficienf light
[a]
• Subjects with little contrast - walls, sky, etc.
[b]
• Too much brightness behind the subject [c]
• Horizontal stripes
[d]
• Subjects through frosted glass
• Subjects beyond nets, etc.
• Bright subject or subject reflecting light
• Shooting a stationary subject when using a tripod
Focusing manually
■When focusing manually, first focus in telephoto before recording, and then reset the
shot length.
(1) Set FOCUS to MANUAL. The c® indicator appears in the viewfinder.
(
2
)
Move the power zoom lever to the "T" side until the lever reaches the end.
(
3
)
Turn the NEAR/FAR dial to achieve a sharp focus.
(
4
)
Set the desired shot length using the power zoom lever.
>
a
Mi
To return to autofocus mode
Set FOCUS to AUTO. The [O’ indicator in the viewfinder disappears.
37