Making your own titles, To edit a title you have stored, If you enter 22 characters in step 4 – Sony CCD-TRV62 User Manual
Page 47: To delete a title, Repeat step 3 until you finish the title, Then press the dial, Press menu to erase the menu display
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Making your own titles
You can make up to two titles and store them in the camcorder. We recommend to eject
the cassette before you begin.
Your title can have up to 22 characters.
(
1
)
While the camcorder is in Standby mode, press MENU to display the menu.
(
2
)
Turn the control dial to select TITLEl SET or TTTLE2 SET, then press the dial.
(
3
)
Turn the control dial to select the desired character, then press the dial.
(
4
)
Repeat step 3 until you finish the title.
(
5
)
When you are finished, turn the control dial to select
^ ,
then press the dial.
(
6
)
Press MENU to erase the menu display.
MENU
t
OflC TO SET
REC MODE
TITLE COL
TITLE POS
TITLE LANG
1 TITLEl SET >
>
TITLE2 SET
4-
[MENU]: END
SiU
PUSH EXEC
TITLE1 SET [N]_________________ >
TITLEl SET [
n
]E________________ >
MENU
t
TITLEl SET
NEW Y0RKE]>
4-
4-
[MENU]: END
>
a.
a.
o
■o
Mi
To edit a title you have stored
In step 2, select TITLEl SET or TITLE2 SET, depending on which title you want to edit,
then change the title.
To move the cursor to the character on the left side, select
If you enter 22 characters in step 4
The title is stored immediately (and you can skip step 5).
If you take 5 minutes or longer to enter characters while a cassette is in the
camcorder
The power goes off automatically. Characters you have entered remain. Turn
STANDBY down once and then up again, then proceed from step 1.
To delete a title
At the leftmost character position, select .^-i and press the dial. Do not erase the title by
selecting empty spaces. If you do so, a title full of empty spaces is stored.
47