Recording from a vcr or tv, To stop recording – Sony CCD-TRV62 User Manual
Page 54
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording from a VCR or TV
You can recorci a tape from another VCR or a TV program from a TV fhat has video/
audio outputs. Connect the camcorder to the VCR or TV using the supplied A/V
connecting cable. Turn down the volume of the camcorder while editing. Otherwise,
picture distortion may occur.
(
1
)
While pressing the small greett button on the POWER switch, set it to VTR.
(
2
)
Press # REC and the button on the right together at the point where you want
to start recording.
In recording and recording pause mode, S VIDEO and VIDEO/AUDIO jacks
automatically work as input jacks.
If your VCR or TV has an S video jack, connect using the S video cable (not supplied)
la]
to obtain a high quality picture.
: Signal flow
If your VCR or TV is a monaural type, connect only the white plug for audio on both
the camcorder and the VCR or TV.
If your VCR or TV does not have an S VIDEO OUT jack, connect cable
[b].
Do not
connect the S video cable (not supplied)
[a]
to the camcorder.
To Check the Picture from a VCR or TV before Recording
Press II after pressing 9 REC. You can check the picture in the viewfinder or on the
LCD screen.
To Stop Recording
Press □.
54