Sony SLV-420 - Manual (Page 34)

Recording TV programs using
the timer (continued)
Tips
• To set the channel, you can
also use the CH+/- or
number buttons.
• To record a video source
from the LINE IN jacks,
press INPUT SELECT to
display "L" in the “CH"
p>osition.
rip
• To set the recording tape
speed, you can also use
TAPE SPEED.
Tip
• To change or correct a
setting before confirming it,
press CURSOR ^ to flash
the item you want to change
and reset it
Press CURSOR , then set the
time to stop recording in the same
way.
TIME1ISCTOCCK 7/4 um
tWTl STAin STQf^ CX
7i tOM • OOHJ»^VW . • »
Press CURSOR [>«then press the
CURSOR (c2::i /
) buttons to select
the channel you want to record.
Only the channels preset in the VCR will
appear. When using a cable box, the cable
box channels appear.
TtuCR SfTOCCX TH UO)
DAIi STAm iTO^
7/ to&n » OOMII. ssr--------
Press CURSOR O, then press the
CURSOR () buttons to select
the tape speed, SP or EP.
See 'To select tape speeds" on page 31.
To confirm your program, press
CURSOR O.
All the settings stop flashing and the
cursor (►) appears in the leftmost column.
To preset another timer setting, move the
cursor to the next line using CURSOR
^
and repeat steps 2 to 7.
8 After making the desired timer
settings, press EXECUTE.
Press POWER to turn off the VCR.
The TIMER indicator on the VCR
lights up and the VCR stands by for
recording. When using a cable box, leave
it on.
The VCR automatically turns on and
starts recording at the preset start time,
and turns off at the preset stop time.
T»eRse7iOcoc 7 t 4 HOM
QATI STAin STD^
./* * * * *
w .. * * * *
* / * * •: * *
. /.. *; * *
* /■ *. * * *
: :
TaACn srrx>ccx 7/4 HOi
OATH STAKT STO^ CH
»-7/ 10SLH •. OOKM SS7W 3* E7
To stop recording
Press ■ STOP.