Sony SLV-420 - Manual (Page 38)

Checking/changing/
cancelling timer
settings
1 rus secnon snows you now to cnecK, cnange ana cancel tne timer
settings after you've stored them in the VCR.
Before you start...
• Turn on your TV and tune in to the VCR.
1
Press POWER to turn on the VCR.
The TIMER REC indicator on the VCR
goes off.
Press MENU and select TIMER SET/
CHECK.
TWERSiT/CXCX
DATE ST«rr STOP
P4/ f4 SLK 7 : OOMa. COW
3/ 13 ||. 90PV It: 1 3ni
< SIT 1. OOAU 3. OOW IWtT
tk ;
CH
a w
so E?
L2 9
mi
Check the timer settings:
• If you do not want to change or cancel
the settings, press EXECUTE, then turn
off the VCR to return to recording
standby.
• If you want to change or cancel the
settings, press the CURSOR (¿2^ / ^)
buttons to move the cursor (►) to the
setting you want to change or cancel.
TUtCRSmCH№< 4rl4 rut
DATS STAirr STOP CH
4J 34 &J4 7: OOfWt COM tv
SM 3 Ftt 9: SOM 11. 1 5 hi SO V
HHQi * III 1: OOm 3. OOUf L2 9
CNOh ftp U: SSPM. 30PI 117V
Change or cancel the timer setting:
• To change the setting, press the CURSOR
(<3 / buttons to flash the item you
want to change, and reset it using the
CURSOR (^ ^) buttons. Then, press
CURSOR (2> to move the cursor to the
leftmost column.
• To cancel the setting, press TIMER CLEAR.
Press EXECUTE.
The VCR returns to the original screen. When
there are any other timer settings left in the
TIMER SET/CHECK menu, turn off the VCR
to return to recording standby.
To check the timer settings during timer recording
Press MENU and select TIMER SET/ CHECK. After checking, press
EXECUTE to turn off the display.