Hanging the base unit on a wall – Sony SPP-AQ25 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Hanging the base unit on a wall
I
If your phone jack is not
modular, contact your
telephone ser\'ice company for
assistance.
Modular
D
!
To mount the wall bracket
directly on the wall, use the
supplied screws.
1
Attach the AC power adaptor cord and the
short telephone line cord to the wall bracket.
2
Hook the wall bracket to the wall plate and
plug the telephone line cord into the modular
jack.
3
Insert the tabs on the top of the wall bracket
into the base unit and press the unit so that
the lower tabs on the wall bracket go into the
unit. Then extend the antenna fully.
4
Connect the AC power adaptor and the
telephone line cord.
For details, see the “Connecting the base unit" section
(page 13).
14
Setting up