Press remote, Press the d) key, Press any two digits for security code (qd – Sony SPP-AQ25 User Manual
Page 34: 4 press the (d key again, 5 press remote again
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operating the answering machine from a
touch-tone phone
Setting your security code
By setting security code,
you can operate the
answering machine from
a touch-tone phone while
you are away from your
home.
REMOTE
C© — d)
■d)
I
Make sure that the BATT
SAVE/RING ON switch is set
to RING ON.
2
3
Press REMOTE.
The REMOTE lamp lights.
Press the d) key.
Press any two digits for security code (QD®
®®).
4
Press the (D key again.
You will hear a long confirmation beep.
5
Press REMOTE again.
The REMOTE lamp goes off.
Using the toll-saver feature
If any new messages are recorded, the answering machine
will answer after two rings. If no new messages are
recorded it will answer after four rings. When you call
from a touch-tone phone and hear more than two rings,
you will know that there are no new messages and you can
then hang up, saving you the cost of the call.
34
Remote control functions