Making and receiving calls, Making calls, 2 dial the phone number – Sony SPP-AQ25 User Manual
Page 18: Receiving calls, 1 when you hear the phone ring, press talk
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
'
Operating the phone
Making and receiving calls
TALK
Making calls
I
■
If you are too away from the
base unit or there is excessive
interference when you press
TALK, you will hear five short
error beeps. In this case, move
closer to the base unit to
improve reception.
I
If reception is poor, you will
hear three short beeps (out-of-
range alarm) and the TALK/
ВАТТ LOW lamp flashes. If this
happens, move closer to the
base unit.
7
Press TALK, and wait until the TALK/BATT LOW
lamp lights.
You hear a dial tone.
2
Dial the phone number.
3
When you finish talking, replace the handset
onto the base unit, or press TALK again.
The call is disconnected.
Receiving calls
I
The handset will not ring on
incoming call if the ВАТТ
SAVE/RING ON switch is set
to ВАТТ SAVE. Howe\ er, vou
can receive calls bv pressing
TALK.
1
When you hear the phone ring, press TALK.
2
When you finish talking, replace the handset
onto the base unit, or press TALK again.
18
Using
as a
telephone