Sony SPP-AQ25 - Manual (Page 28)

Playing back messages
starting playback
I
■
If a call comes in during
playback, playback stops.
If there is a newly recorded message;
You will hear beeps in the AUDIBLE INDICATOR ON
mode. The MESSAGE lamp flashes.
To play back the messages, press PLAY/STOP ^ ■ on
the base unit.
The unit rewinds the tape and plays back from the first
new message. After playback, the unit returns to the
answer mode.
I
■
The unit only counts up to 19
messages. However, if there is
tape remaining, the unit will
continue to record incoming
messages. In this case,
however, the 20th and all
following messages will be
counted as one message, and
you will not be able to skip or
repeat between them.
To skip the current message-----------
Press SKIP/FF during playback.
To repeat the current message----------------
Press REPEAT/REW during playback.
To stop the tape
Press PLAY/STOP I
If you do not press any button for 10 seconds, the unit
returns to the answer mode. The tape will be
automatically forwarded to the end of the message to
prevent new incoming messages from recording over
the current ones.
To resume playback, press PLAY/STOP ► ■ again.
28 Using as a telephone answering machine