Sony SPP-AQ25 - Manual (Page 39)

Operatirig^^e answering machine from a toudh-tone phphe
!
If 20 seconds elapse without
pressing a control code, the line
will be disconnected.
1
Call your phone from a touch-tone phone.
2
When you hear the greeting, press CE, then
your security code (page 34).
If there are messages which have not been played back
yet, you will be informed by beep sound.
■ If you did not turn on the answering machine
Your phone will pick up after lO rings. Press (S) and
your security code.
3
Press dialing keys for the desired operation
command within 20 seconds.
4
When you finish, disconnect the line.
Table of control codes
Operation Press: Notes
to play back messages (DCS) The messages are played back from the
first one.
to repeat current messages (DCD Press during playback.
to skip current messages CDC3) Press during playback.
to clear messages CD(4) See page 29.
to record memo message (DCS) Press (DCD to stop recording.
to interrupt operation and
wait for the next operation (DCS) —
to record or change your
greeting (DCD • Press (DCD to stop recording.
to check your greeting (DCS) —
to turn on answering
macliine
(DCS) See page 27.
to turn off answering
machine (DCS) —
Remote control functions |35