Camera recording, A] to stop recording momentailly [a – Sony CCD-TRV53 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Camera recording
Make sure that a power source and a cassette is inserted and that the START/STOP
MODE switch inside the LCD panel is set to A ■
When you use the camcorder for the first time, power on it and reset the date and
time to your time (p. 50) before you start recording. The date is automatically
recorded for 10 seconds after you start recording
(AUTO DATE feature).
This feature
works only once a day.
Before you record one-time events, you may want to make a trial recording to make
sure that you are using the camcorder correctly.
(1) While pressing the small green button on the POWER switch, set it to
CAMERA.
(2) Turn STANDBY up. The "STBY" indicator appears in the viewfinder.
(3) Press START/STOP. The camcorder starts recording and the "STBY"
indicator changes to the "REC" indicator.
You can also select Recording mode, SP (standard play) mode or LP (long play), mode.
Set~KEC MODE in the menu system according to the length of your planned recording
before you start.
gSTBY
0:00:00
AUTO DATE
S REC
0
:
00:01
JUL
4
1997
[a]
To stop recording momentailly [a]
Press START/STOP again. The "REC" indicator in the viewfinder changes to the
"STBY" indicator
(Standby mode).
To finish recording [b]
Press START/STOP. Turn STANDBY down, and set the POWER switch to OFF.
Then, eject the cassette and remove the battery pack.
11