Using alternative power sources, Note on power sources, Using the house current – Sony CCD-TRV53 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
r
Advanced operations
Using alternative power sources
You can choose any of the following power sources for your camcorder: battery pack,
the house current, alkaline battery and 12/24 V car battery. Choose the appropriate
power source depending on where you want to use your camcorder.
Place
Power source
Accessory to be used
Indoors
House current
Supplied AC power adaptor
Outdoor
Battery pack
Battery pack (Ni-Cd type)
Size AA (LR6) alkaline
Battery case (CCD-TRV32/TRV52/
batteries
TRV53 only)
In the car
12 V or 24 V car battery
Sony DC pack DCP-77
Note on power sources
Disconnecting the power source or removing the battery pack during recording or
playback may damage the inserted tape. If this happens, restore the power supply
again immediately.
This mark indicates that this product is a genuine accessory for Sony video
product. When purchasing Sony video products, Sony recommends that you
purchase accessories with this "GENUINE VIDEO ACCESSORIES" mark.
U s i n g t h e h o u s e c u r r e n t
To use the supplied AC power adaptor:
(
1
)
Connect the power cord to a wall outlet. Insert the top of the connecting plate
of the AC power adaptor into the top of the battery mounting surface. Push
the connecting plate so that it attaches firmly. Make sure that you hear clicks
twice.
(2) Set the selector to VTR (DC OUT).
24