To view a still picture (playback pause), To locate a scene (picture search), Notes on playback – Sony CCD-TRV53 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Playing back a tape
Using the Remote Commander
You can control playback using the supplied Remote Commander.
Before using the Remote Commander, insert the size AA (R6) batteries.
To erase the screen indicators
Press DISPLAY to erase the screen indicators on the LCD screen. To display the
indicators, press again.
The indicators don't appear on the TV.
Using headphones or an earphone
Connect headphones (not supplied) to the D jack (CCD-TRV52/TRV512) or an
earphone (not supplied) to the ® jack (CCD-TRV32/TRV53/TRV312). You can adjust
the volume using VOLUME.
To view the playback picture in the viewfinder
Close the LCD panel. The viewfinder turns on automatically. When using the
viewfinder, you can monitor the sound only by using headphones or an earphone.
To view on the LCD screen again, open the LCD panel. The viewfinder turns off
automatically.
Various playback modes
To view a still picture (playback pause)
Press II during playback. To resume playback, press II or O.
To locate a scene (Picture Search)
Keep pressing or ►► during playback. To resume normal playback, release the
button.
To monitor the high-speed picture while advancing the tape or rewind
(Skip Scan)
Keep pressing -dd while rewinding or ►► while advancing the tape.
To resume normal playback, press t>.
Notes on playback
• Streaks appear and the sound is muted in the various playback modes.
• When playback pause mode lasts for 5 minutes or more, the camcorder automatically
enters stop mode.
22