Notes on the steadyshot, Releasing the steady shot function – Sony CCD-TRV53 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Releasing the STEADY SHOT function
When you shoot, the «Q)i indicator appears. This indicates that the SteadyShot
function is working and the camcorder compensates for camera-shake.
You can release the SteadyShot function when you do not need to use the SteadyShot
function. Do not use the SteadyShot function when shooting a stationary object with a
tripod.
(1) While pressing PUSH OPEN, open the LCD panel.
(2) Set STEADY SHOT to OFF. The indicator goes off.
To activate the SteadyShot function again
Set STEADY SHOT to ON.
Notes on the SteadyShot
• The Stead)?Shot will not correct excessive camera-shake.
• When you switch the SteadyShot function on or off, the exposure may fluctuate.
• When you record in 16:9FULL mode, the SteadyShot function does not work and the
(0> indicator flashes.
39