Sony CCD-TRV53 User Manual
Page 63
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Trouble check
I
Symptom
Cause and/or Corrective Actions
The End Search function does not
activate.
• The cassette was ejected after you recorded on it.
The End Search function will not activate until you make
a new recording after reinserting the cassette.
The date or time indicator
disappears.
• Reset the date and time, (p, 50)
The SteadyShot function does not
activate.
•
STEADY SHOT is set to OFF.
■*
Set STEADY SHOT to ON. (p. 39)
•
The SteadyShot function does not work when the wide
mode is set to 16:9FULL. (p. 39)
The autofocusing function does
not work.
•
FOCUS is set to MANUAL.
■» Set it to AUTO, (p.36)
•
Shooting contidions are not suitable for autofocus.
-» Set FOCUS to MANUAL to focus manually, (p. 36)
Recording stops in a few
seconds.
• START/STOP MODE switch is set to
1
orSSEC.
•»
Set it to
A
. (p. 14)
The title display position shifts.
•
There are unwanted blanks before or after the title.
■»
Delete them then select
J.
The fader function does not
work.
• The START /STOP MODE switch is set to 5SEC or .
■»
Set it to
A
■ (p. 14)
No sound or only a low sound is
heard when playing back a tape
(CCD-TRV52/TRV512 only).
• The stereo tape is played back with HiFi SOUND set to 1
or 2 in the menu system.
•»
Set to STEREO in the menu system (p. 27)
Picture
Symptom
Cause and/or Corrective Actions
The image on the viewfinder
screen is not clear.
• The viewfinder lens is not adjusted.
■» Adjust the viewfinder lens. (p. 12)
A vertical band appears when a
subject such as lights or a candle
flame is shot against a dark
background.
• The contrast between the subject and background is
too high. The camcorder is not malfunctioning.
■»
Change locations.
The picture is "noisy".
• The video heads may be dirty.
-»
Clean the heads using the Sony V8-25CLH cleaning
cassette.
Cp. 57)
■
The picture does not appear in
the viewfinder.
• The LCD panel is open.
■»
Close the LCD panel, (p. 15)
The picture does not appear on
the LCD screen.
• Incorporated fluorescent tube is worn out.
•»
Please contact your nearest Sony dealer.
A vertical band appears when
shooting a very bright subject.
• The camcorder is not malfunctioning.
An unknown picture is displayed
in the viewfinder or on the LCD
screen.
• If 10 minutes elapsed after you set the POWER switch to
CAMERA without inserting a cassette, the camcorder
automatically starts the demonstration.
■»
Insert the cassette, and the demonstration stops. You can
make the demonstration not appear in the menu system.
(p.27)
>
o.
a
Continued to the next page
63