Connecting ccd-trv32/trv312/trv53, Using the av cordjess ir receiver - lj^ser link – Sony CCD-TRV53 User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Watching on a TV screen
Connecting CCD-TRV32/TRV312/TRV53
: Signal flow
AUDIO IN
If your VCR or TV is a monaurai type (CCD-TRV52n'RV512 oniy)
Connect only the white plug for audio on both the camcorder and the VCR or the TV.
With this connection, the sound is monaural even on the stereo model.
To connect to a VCR or TV without Video/Audio input jacks
Use the RFU-95UC RFU adaptor (not supplied).
Using the AV cordjess IR receiver - LJ^SER LINK '!
- CCD-TRV52/TRV512/TRV53 only
Once you connect the AV cordless IR receiver (not supplied) having the H, mark to
your TV or VCR, you can easily view the picture on your TV. For details, refer to the
instruction manual of the AV cordless IR receiver.
LASER LINK is a system which transmits and receives a picture and sound between
video equipment having the i mark by using infrared rays. LASER LINK is a
trademark of Sony Corporation.
To play back on a TV
(1) Set the POWER switch on the camcorder to PLAYER.
(
2
)
After connecting your TV and AV cordless IR receiver, set the POWER switch
on the AV cordless IR receiver to ON.
(3)
Turn the TV on and set the TV /VCR selector on the TV to VCR.
(4)
Press LASER LINK. The lamp of LASER LINK lights.
(5)
Press t> on the camcorder to start playback.
(
6
)
Adjust the angle and direction of both the camcorder and AV cordless IR
46