Connecting, Optional, Components – Sony MHC-MC1 User Manual
Page 13: Connecting an md deck for analog recording, Connecting an md deck for digital recording, Continued, Connecting optional components
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
Connecting
optional
components
Connecting an MD deck for analog
recording
Make sure to match the color of the plugs and
the connectors. To listen to the sound of the
connected MD deck, press FUNCTION
repeatedly until “MD" appears.
To enhance your system, you can connect
optional components. Refer to the
instructions of each component.
To the audio output To the audio input
of the MD deck
of the MD deck
Connecting audio
components
Select one of the following two connections,
depending on the equipment to be connected
and method of connecting.
Connecting an MD deck for digital
recording
You can record from CD into the MD deck
digitally by connecting an optical cable.
To the DIGITAL IN jack of the MD deck
Note
If you cannot select "MD” even when you have
pressed FUNCTION, press l/Ci) while holding down
FUNCTION when the power is turned off.
"VIDEO" will be switched to "MD". To return to
"VIDEO", do the same procedure.
a
(D
5*
tfi
(A
a
Tip (MHC-MC3AV only)
When you connect a Sony MD deck, you can use the
MD O’,
li, and ■ buttons on this system's remote
to perform play, pause, and stop operations.
continued
1 3