Sony MHC-MC1 - Manual (Page 32)

I
Labeling a CD
— Disc AVemo
You can label each disc using up to 11
characters. When you select a CD-TEXT disc,
the first 11 characters of the disc title are
stored as a disc memo. Whervever you select
the labeled CD, the label (Disc Memo)
appears in the display.
1
Press FUNCTION repeatedly until
"CD" appears.
2
Turn SELECTOR until the disc
number you want to label appears.
When you label a disc with the front
cover closed, the disc number of the disc
at the playing position appears.
When you label a disc with the front
cover open, the disc number at the
loading position appears-
Press INPUT.
"DISC MEMO" flashes in the display.
To label a group (1~5) instead of the
current disc, turn SELECTOR to display
the corresponding group number.
4
Press ENTER.
5
Turn SELECTOR until the character
you want appears.
The cursor disappears and the first spact
for the disc title flashes.
To select characters on the system
Turn SELECTOR to the left or right.
To select characters on the remote
Press ♦ or ♦ until the type of character
you want appears, then press ♦ or ♦ to
select the character you want.
6
Press to enter the character.
The cursor shifts to the right and waits
for input of the next character.
¿s>
7
Repeat steps 5 and 6 to input
additional characters.
if you make a mistake
Press or to move the cursor to
the position you want to correct, then
turn SELECTOR to select the appropriate
character or press DELETE to remove
the character.
32