Sony MHC-MC1 - Manual (Page 20)

Recording from the
radio
You can record the radio program on a tape
bv calling up a preset station. You can use
TYPE I (normal) or TYPE II (Cr02) tapes. The
recording level is automatically adjusted.
1
Press TUNER/BAND to select the
band you want.
2
Turn SELECTOR to tune in a preset
station.
Turn clockwise
for higher
preset
numbers.
Preset number Frequency
n fo
I
3
Press — ai\d insert a blank tape into
deck B,
4
Press «REC.
Deck B stands by for recording.
Press DIRECTION repeatedly to
select "ini" to record on one side.
Select (or "RELAY") to
record on both sides.
6 Press I I PAUSE.
Recording starts.
To stop recording
Press ■.
Tips
• If you want to record from the reverse side, press
TAPE B -<3 to light its indicator after pressing
• REC.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side
• To record non-preset stations, use + and - in step.
to tune in the desired station manually.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY-NR so
that "DOLBY NR" appears after pressing # REC.
• If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
20