Sony MHC-MC1 - Manual (Page 19)

I
Press TUNER/BAND repeatedly
until the band you want appears in
the display.
Every time you press the button, the
band changes as follows;
FM«-^ AM
Turn SELECTOR to tune in the
desired preset station.
For MHC-MC3AV
You can also use TUNING + or - on the
remote to tune in preset stations.
For MHC-MC1
You can also use or on the
remote to tune in preset stations.
Turn clockwise
for higher
preset
numbers.
Preset number Frequency
r-r, •S!
To Do this
Turn off the radio Press t/6-
Adjust the volume Turn VOLUME (or press
VOLUME (VOL) +/-
on the remote).
To listen to non-preset radio
stations (front panel only)
Use manual or automatic tuning in step 2.
For manual tuning, press + or - repeatedly.
For automatic tuning, press and hold + or
Tips
• Pressing TUNER/BAND when the power is off
automatically turns the power on and tunes to the
last received station (One Touch Play).
• You can switch from another source to the radio
just by pressing TUNER/BAND (Automatic
Source Selection).
• When an FM program is noisy, press
STEREO/MONO so that "MONO" appears in the
display. There will be no stereo effect, but the
reception will improve. Press the button again to
restore the stereo effect.
• To improve broadcast reception, reorient the
supplied antennas.
I
O
,3
19