Step 2: setting up the surround speakers, For mhc-mc3av, For mhc-mc1 – Sony MHC-MC1 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
step 2: Setting up
the surround
speakers
For MHC-MC3AV
Connecting the supplied rear and center
surround speakers enables you to fully enjoy
Dolby Pro Logic Surround sound. Dolby Pro
Logic Surround is a decoding system
standardized in TV programs and movies.
Dolby Pro Logic Surround improves the
sound image by using four separate channels.
These channels marupulate the sound to be
heard and enhance the action as if it happens
on the screen.
For MHC-MC1
In addition to the front speakers, connecting
the optional rear speakers provides
reverberation and reflective sound that
emphasize the sound from the front speakers.
Before you connect them, determine the best
location for your speakers.
1
Place the front speakers at an angle
of 45 degrees from your listening
position.
Center
(For MHC-MC3AV only)
Place the center surround speaker at
about the same height as the front
speakers
(A).
Align the center
surround speaker with the front
speakers or place it slightly back
from the position of the front
sp>eakers
(B).
Center surround speaker
Front
speaker (L)
Front
speaker(R)
Place the rear surround speakers
facing each other at about 60 to
90 cm (2 to 3 feet) above your
listening position.
speaker (L)
• For MHC-MC3AV only
speaker(R)
O
A
5*
tn
P)
<D
a
continued