Sony MHC-MC1 - Manual (Page 38)

Recording a CD by specifying track
order (continued)
7
Program additional discs or tracks.
To program Repeat steps
Other discs 4 and 6
Other tracks on the same disc 5 and 6
Other tracks on other discs 4 to 6
8
Press CD SYNCHRO.
Deck B stands by for recording and the
CD stands by for playback. Tl\e
TAPE B O- indicator (for front side)
lights up.
Press DIRECTION repeatedly to
select to record on one side.
Select "CZtS" (or "RELAY") to
record on both sides.
1 0 Press I I PAUSE.
Recording starts.
To stop recording
Press ■.
To check the program
Press CHECK repeatedly. After the last track,
"-END*" appears.
To clear a specific track or disc
Press CHECK repeatedly to display the step
you want to clear, then press CLEAR.
To clear the entire program
Press and hold CLEAR.
To cancel Program Play
Press CONTINUE.
Tips
»If a track is cut off during recording on both sides
(because the tape ended while recording on the
front side), the track will automatically be
recorded from the beginning on the reverse side.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY-NR so
that "DOLBY NR" appears after pressing
CD SYNCHRO.
38
I