Sony KP-61XBR200 - Manual (Page 27)

Using Your New Projection TV
Setting Up the Projection TV
Automatically
The AUTO SET UP feature will allow you to
set the on-screen language and set all
receivable channels.
The AUTO SET UP feature does not apply for
installations that use a cable box for all channel
selection.
You can also set up the projection TV manually,
(see "Using the CHANNEL SET UP menu" on
page 43)
Notes:
• Before you perform AUTO SET UP again,
make sure that the input from ANT (not
AUX) is selected by pressing ANT until
"AUX" does not appear next to the
channel number.
• Perform this function during the day, with
the antenna and / or cable properly
connected, to ensure that all available
channels will be broadcasting and
receivable.
• When you perform AUTO PROGRAM,
your CHANNEL FIX, ON/OFF TIMER,
and CHANNEL BLOCK settings will be
erased.
• When you perform AUTO SET UP, all the
settings in the VIDEO, ADVANCED
VIDEO and AUDIO menus are reset to the
factory settings.
Using the buttons on the front panel of the
projection TV: 3 Press VOLUME - to continue.
TV,VIDEO - VOLUME * - CHANNEL
0 DÛQ0 0
STEHEOn nTlMER«TAfJD0i
1 #ress POWER to turn on the projection
TV.
The AUTO SET UP screen appears.
ENGLISH (CH*)
ESPAÑOL 1CH-Ì
FRANÇAIS (VOL * 1
AUTO SET UP [VOL - 1
DEMO [ TV / VIDEO ]
First please connect
the antenna
Press Í SET UP 1 to exit
2 Press CHANNEL + to select English,
CHANNEL - to select Spanish or
VOLUME + to select French.
The screen will change to reflect your
choice.
- VOLUME + - CHANNEL +
ENGLISH [CH*1
ESPAÑOL [CH-]
FRANQAIS (VOL + 1
AUTO SET UP [VOL-1
DEMO [TV/VIDEO i
Primero conecte la
antena
Oprima 1 SET UP
para
salir
For a DEMO of functions and menus, press
TV/VIDEO.
Ò
YES (CH.)
NO ICH- ]
4 Press CHANNEL -t to preset channels
automatically.
"AUTO PROGRAM" appears and the
projection TV starts scanning and
presetting channels automatically. While
scanning, the received channel will be
displayed on the sub screen. When all the
receivable channels are stored, the lowest
numbered channel is displayed. If the
projection TV receives cable TV channels,
CABLE is set to ON automatically.
(continued)
23