Sony KP-61XBR200 - Manual (Page 45)

© Using the TIMER Menu
TIMER
DAYLIGHT SAVING
CURRENT TIME
ON/OFF TIMER
CHANNEL BLOCK
Move •• Selects Exit
After setting the clock you can use the timer to
turn the projection TV on and off.
For detailed information on using the remote
control to modify menu settings, refer to
"Learning Menu Selection" on page 34.
To select the TIMER © menu:
Display Highlight ©
♦
Select
Tip V
Sct daylight saving time before setting the clock. Any
loss of power will cause these settings to he erased.
DAYLIGHT
SAVING
Automatically
adjusts the time.
CURRENT
TIME SET
f^cessary for the
TIMER.
ON/OFF TIMER
Wake up or
scheduled viewing
Spring: Select YES to compensate for Daylight Saving Time.
The current time automatically moves ahead one hour.
Fall: Select NO at the end of Daylight Saving Time.
The current time moves back one hour.
1 Press (t , then move the joystick up or down until
the current day (MON-SUN) is displayed, and press
©.
2 Move the joystick up or down until the current hour
(01-12) and AM/PM is displayed, and press © .
3 Move the joystick up or down until the current minute
(00-59) is displayed, and press © .
The Clock has now started. Press MENU to exit.
CURRENT TIME
Move-;- Selecta E»ti
ON/OFF TIMER
SUN 12 00AM
■ Select A Exrl
1 Select the desired timer (1 or 2).
2 Move the joystick up or down until the desired day
(MON-SUN) or range of days (EVERY SUN-SAT or
EVERY MON-FRI) is displayed, and press © .
3 Move the joystick up or down until the time (hours
and minutes) that you want the projection TV to
remain on is displayed, and then press © .
4 Move the joystick up or down to set the time duration (maximum of 6 hours)
and press © .
5 Move the joystick up or down to select the desired channel and press © ,
The timer is now set. The TIMER indicator on your projection TV will be lit.
Press MENU to exit. To cancel your timer setting, select timer 1 or 2 and press
RESET while in the ON/OFF TIMER window. Performing AUTO PROGRAM will
erase all TIMER settings.
(continued)
41