Sony KP-61XBR200 - Manual (Page 52)

Adjusting Your SET UP (menus) (continued)
Using the SET UP Menu
[iiD
SETUP
CAPTION VISION [cell
£
SELECT OUT MONITOR
LANGUAGE ENGLISH
[év
VIDEO LABEL
DIRECT PLAY
FREEZE MODE NORMAL
(3
Move :■ Select ¡a Exil @59
For detailed information on using the remote
control to modify menu settings, refer to
"Learning Menu Selection" on page 34.
To select the SET UP ^ menu:
Display Highlight © '
♦
Select
Notes:
• When you set SELECT OUT to TV OUT,
you cannot swap the main/right and
window/left pictures.
• The SELECT OUT signal is only available
when the projection TV is on.
48
CAPTION VISION
Trlcii^ion closed
caption display
SELECT OUT
Output signal
selection from
SELECT OUT
Some programs are broadcast with Caption Vision.
To display Caption Vision, select the desired option and press [_____
CAPTION VISION options: i^1 ,[^2.fCCl3,[^4. TEXT1, TEXT2, TEXTS
or TEXT4. (for details, see “CAPTION VISION" on page 26)
ISELECT OUT
nmm
LANGUAGE VIDEOl
VIDEO LABEL VIDE02
DIRECT PLAY VIDE03
FREEZE MODE VI0E04
D VIDEOS
TV OUT
You can select the desired output signal from the
SELECT OUT jacks at the rear of the projection TV.
MONITOR: Select to edit tapes while monitoring.
SELECT OUT outputs the picture displayed on
the projection TV screen.
VIDE01-VIDE05: Select to edit tapes while viewing
an input image different from that being recorded.
SELECT OUT outputs the signal input to the projection TV regardless of
the displayed picture on the screen.
TV OUT: Select if you conneef an AV receiver to VIDEO 1 IN. SELECT OUT
outputs the signal that the TV is tuned to, regardless of the displayed
picture, (see “Connecting an AV receiver” on page 16 for connection)
If you select TV OUT, a pop-up menu appears.
| h F| SETUP
CAPTION VISION [cell
LSELECT OUT. MONITORI
LANGUAGE VIDEOl 1
VIDEO LABEL VIDE02
DIRECT PLAY VIDEOS
0 FREEZE MODE . VIDE04
9 Z) VIDEOSI
n
ISet up using
M lonlv VIDEOl innuf’
Move •: Select A
Exit NEfM
Select YES only if you connect an AV receiver, with no other equipment, to
your projection TV.
Select NO if you connect multiple components to your projection TV. You
can select an input (VIDE01 - VIDEOS) with the TV/VIDEO button.