CNet Technology CNIG904S - Manual (Page 10)

CNet Technology Inc Installation
7
3. Connect ADSL or Cable Modem
Connect the ADSL or Cable modem to the WAN port on the Broadband Router. Use the
cable supplied with your modem. If no cable was supplied, use a standard LAN cable.
4. Power Up
Connect the supplied power adapter and power up.
Use only the power adapter provided. Using a different one may cause hardware damage
5. Check the LEDs
When the Broadband Router is powered On, the DATA STATUS LAN LED should flash,
then turn on. If it stays flashing (in Green and Orange), there is a hardware error.
For more information, refer to Top - Mounted LEDs in Chapter 1.