CNet Technology CNIG904S - Manual (Page 50)

CNet Technology Inc Access Control
47
Data
PC Name Enter a name to identify this PC.
Network Adapter
Address Hardware address for this PC. You can use the Windows "Winipcfg"
program or your LAN management program to find this address.
Reserve entry in
DHCP Table Check this if you wish to reserve an IP address for this PC. This is
useful if you have to provide the IP Address for other programs or
users.
If this is left unchecked, the following entry can be ignored.
Reserved
IP Address This relates to the entry above. Enter the reserved address here. This
MUST be within the range used by the DHCP server (set on the
Device – Internal LAN Port screen).
Security Group Select the security group for this PC. If you only wish to reserve an IP
Address, and are not using the security (access control) features,
simply leave this at "Everyone".
Filters
The Filters screen is reached from the Access Control link on the navigation bar. An example
screen is shown below.
Figure 27: Filters Screen
This screen allows you to define packet filters. When you define security groups, on the "Secu-
rity Groups" screen, you can select from any filters defined here, as well as the pre-defined
filters.