CNet Technology CNIG904S - Manual (Page 46)

43
Chapter 9 Chapter 9 Chapter 9 Chapter 9
Access Control Access Control Access Control Access Control
This Chapter explains how to configure and use the Broadband Router's "Ac-
cess Control" feature.
Overview
The Access Control feature allows administrators to restrict Internet Access by individual PCs.
The process uses "Packet Filtering" to block or discard data packets. By default, no packets are
blocked or discarded.
To use this feature:
• Set the desired restrictions on the "Everyone" group.
• All PCs are in the "Everyone" group unless explicitly moved to another group, using
the PC screen.
• Generally, access rights are managed by making the "Everyone" group the most re-
strictive group. Additional access rights then have to be explicitly granted by
assigning a user to a less restrictive group.
However, if you wish to restrict only a small number of users, it may be more conven-
ient to reverse this, and make the "Everyone" group the least restrictive group. Only
users requiring restrictions need to be assigned to a more restrictive group.
• Set the desired restrictions on the other groups ("Group 1", "Group 2", etc ) as needed.
• For each PC you wish to move from the "Everyone" group, enter their details on the PCs
screen, and assign them to the desired group
You can limit Internet access for ALL PCs without
entering ANY PC data. Simply apply the desired
restrictions to the "Everyone" group.
It is also possible to define your own packet filters, and use these filters in addition to the pre-
defined filters. Defining your own filters is optional.
9