CNet Technology CNIG904S - Manual (Page 15)

CNet Technology Inc Broadband Router User Guide
12
DHCP Server
Operation If Enabled, the Broadband Router will allocate IP Addresses to PCs on
your LAN. The default and recommended value is Enabled.
If you are already using a DHCP Server, this setting must be
DISABLED, and the existing DHCP server must be re-configured. See
Chapter 5 for further details.
Start IP Address
Finish IP Ad-
dress The IP Start Address and IP Finish Address fields set the values used
by the DHCP server.
This range also determines the number of DHCP clients supported.
(Maximum 253.)
DNS (Domain Name Server)
DNS (Domain
Name Server)
IP Addresses You do NOT need to enter DNS addresses UNLESS you are using a
Fixed IP Address on the WAN port. (Your ISP has allocated you a
fixed IP Address.) In this case, your ISP should recommend a DNS.
You need to enter that address or addresses here.
If using a Dynamic IP Address (DHCP Client), on the WAN port, the
DNS entries are optional.
Multiple DNS entries should be entered in the order you want them
accessed. (The first available DNS will be used.)
Routing Table
Routing Table
If your LAN contains an existing Router or Routers, refer to Chapter 6
- Routing.