CNet Technology CNIG904S - Manual (Page 22)

CNet Technology Inc Configuration
19
LAN/Device Status
The LAN Status link on the menu will result in a screen like the example below.
Figure 11: Status Screen
Data – LAN/Device Status
Device
Firmware Version Version of the firmware (embedded software, including this program)
which is currently installed.
Hardware ID The hardware ID of this device, used by the manufacturer.
Network Address
Translation This will display "Enabled" (NAT is On) or "Disabled" (NAT is Off)
LAN Port
Physical Address The "Hardware" address of this device, as seen by other devices on
the Internal LAN.
IP Address The IP Address of this device, as seen by other devices on the Inter-
nal LAN.
Network Mask The Network Mask (Subnet Mask) for the IP Address above.
DHCP Server This shows the status of the DHCP Server function. The value will be
"Enabled" or "Disabled".
DHCP Table
IP Address The IP Address which has been allocated by the DHCP server to the
other device.
Physical Address The Physical Address (Hardware Address) of the device which has
been allocated a IP Address.