CNet Technology CNIG904S - Manual (Page 9)

6
Chapter 2 Chapter 2 Chapter 2 Chapter 2
Installation Installation Installation Installation
This Chapter covers the physical installation of the Broadband Router.
Requirements
• Ethernet LAN (10/100BaseT) and the TCP/IP protocol.
• For Internet Access, a DSL or Cable modem, and an Internet Access account with an ISP.
Installation Procedure
Figure 3 Installation Diagram
1. Choose an Installation Site
Select a suitable place on the network to install the Broadband Router. Ensure the
Broadband Router and the Cable/DSL modem are powered OFF.
2. Connect LAN Cables
Use standard LAN cables to connect PCs to the Switching Hub ports (LAN ports) on the
Broadband Router. Both 10BaseT and 100BaseT connections can be used simultaneously.
If required, connect the Broadband Router's "Uplink" port to a standard port on another
hub. A standard LAN cable should be used.
Note: If the "Uplink" port is used, Port 4 can NOT be used.
2