CNet Technology CNIG904S - Manual (Page 21)

CNet Technology Inc Broadband Router User Guide
18
Connection Log Messages
Message Description
Connect on
Demand Connection attempt has been triggered by the "Connect on De-
mand" setting.
Manual connection Connection attempt started by the "Connect" button.
Reset physical
connection Preparing line for connection attempt.
Connecting to remote
server Attempting to connect to the ISP's server.
Remote Server
located ISP's Server has responded to connection attempt.
Start PPP Attempting to login to ISP's Server and establish a PPP connection.
PPP up successfully Able to login to ISP's Server and establish a PPP connection.
Idle time-out reached The connection has been idle for the time period specified in the
"Idle Time-out" field. The connection will now be terminated.
Disconnecting The current connection is being terminated, due to either the "Idle
Time-out" above, or "Disconnect" button being clicked.
Error: Remote Server
not found ISP's Server did not respond. This could be a Server problem, or a
problem with the link to the Server.
Error: PPP Connec-
tion failed Unable to establish a PPP connection with the ISP's Server. This
could be a login problem (name or password) or a Server problem.
Error: Connection to
Server lost The existing connection has been lost. This could be caused by a
power failure, a link failure, or Server failure.
Error: Invalid or
unknown packet type The data received from the ISP's Server could not be processed.
This could be caused by data corruption (from a bad link), or the
Server using a protocol which is not supported by this device.