Check the lcd panel display, Af-assist lamp – Canon EOS 3000 QD User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
O Full Auto Mode
.
j
C n
|L
J U
liSBI
I
I
I I
I
Check the LCD panel display.
• The shutter speed and aperture will
be set automatically and displayed on
the LCD panel and in the viewfinder.
• If the
<i>
icon blinks in the
viewfinder in low-light or backlit
conditions, pop up the built-in flash.
See page 54.
Compose the shot and press the
shutter button completely to take
the picture.
a
If the in-focus indicator blinks, the shutter cannot be released. See pages 48
and 60.
• If you pop up the built-in flash beforehand, it will fire automatically under
low-light or backlit conditions.
• See page 54 for notes on using the built-in flash.
AF-Assist Lamp
In the Basic Zone modes and Creative Zone modes, the AF-assist lamp
lights automatically when necessary.
Under difficult autofocusing conditions, the AF-assist lamp lights
automatically to illuminate the subject for autofocusing.
a
»The AF-assist lamp is effective up to about 4 meters (13.2 ft),
• Even while an external EOS-dedicated Speedlite is attached to the camera,
the camera’s AF-assist lamp will be enabled.
25